• Power set resolution: 1 watt at full power
• Power amplifiers: rugged NXP LDMOS transistors
• Harmonic suppression >50 dBc
• Power control accuracy: 0.1%
• High accuracy timer
• Power measurement accuracy: forward power 0.1%, reflected power 0.5%
• mismatch for full power output: 6 dB RL/3:1 VSWR
• mismatch with power fold back; 4 dB RL/4.5:1 VSWR
• Power switching speed:< 1msec.

Modulation

• Modes: CW, pulse width modulation, or external RF input
• PWM Mode: 10 Hz to 1 kHz pulse rate, 0-100% duty cycle
• Gas plasma ignition feature
• Low level RF input and output connectors permit multiple generators to be phase locked

Control System

• Feature-rich Windows-based interactive control software
• USB 2.0 interface to Windows PC
• Complete LabView™ support
• Local or remote operation
• Ethernet remote control
• PLC-type hardware control interface with 24 VDC and 20 ma. current loop inputs and outputs
• Arc detection and emergency stop inputs with 1 us. response time

Software Highlights

• Point and click power and frequency setting across the band
• Real-time display of forward and reflected power and return loss
• Automatic selection of best single frequency
• Automatic generation of optimal band map for frequency sweeping
• Integral scalar network analyzer
• Band map edit, save and load
• Programmable ignition pulse for gas plasma

RF Output

• 7/16 DIN coaxial connector outputs

Power Supply

• AC mains: 360 to 528 VAC three phase 50/60 Hz
• High efficiency 50 volt switch mode power supply
• Line-to-RF-conversion efficiency: 55%
• Ambient environment temperature: 0⁰-50⁰ C

Dimensions and Weight

• PTL-2.5: 6.5″H x 19.5″D x 17.25″W, Weight: 55 lbs.
• 19" rack mountable

These are preliminary specifications and are subject to change. Patents applied for.