12.5kW L-Band 902-928 MHz Solid State High-Power Microwave Generator
12.5kW L-Band 902-928 MHz Solid State High-Power Microwave Generator
Key Features
- Internal frequency and power control
- Software control utilizing a Windows™ based GUI
- Frequency sweeping capability
- Built in Forward and Reflected power measurement
- Distributed multi-processor control architecture
- WR975 Waveguide output (external circulator required)
Microwave Power Output
| Model | Max Nominal Power |
|---|---|
| PTL-12.5W9-PREHU-0 | 12.5 KW |
- Power set resolution input values: 1 watt
- Power Amplifiers: Rugged LDMOS transistors
- Comprised of Qty 6, 2.5 KW modular power blades
- Integrated RF output timer
- Power control accuracy: 0.1%
- Power measurement indicators: Forward & Reflected
- Max. mismatch: 10 dB RL/2:1 VSWR
Frequency Range
Operating Modes
Control System
Software Highlights
Frequency Range
- 902-928 MHz
- Frequency Step Size: 100 kHz
Operating Modes
- Fixed, single frequency
Control System
- Windows-based interactive control software
- External E-Stop
- Local or remote operation
- Ethernet remote control
- PLC-type hardware control interface with 24VDC and 20ma current loop inputs and outputs
- Arc detection emergency stop inputs
Software Highlights
- Point and click power and frequency setting across the band
- Forward/Reflected power and return loss indicators
- Best frequency selection based on load measurements
- Variable power over frequency sweep creation tool
- Programmable initial pulse for applications such as gas / plasma ignite
Power Supply
Dimensions and Weight
Facility Requirements:
Power Supply
- AC mains: 380 or 480 VAC three phase delta 50/60 Hz configurable
- 50-volt switch mode power supply
- Line-to-RF-conversion efficiency at full power: 50%
- Air Cooled
Dimensions and Weight
- 45” (115cm) H x 38” (97cm) D x 42” (107cm) W
- Weight: 600 lbs. (272kg)
Facility Requirements:
- Input Water Flow Min: 15 GPM (57 LPM)
- Input Water Temperature: 15⁰C – 20⁰C
- Input Water Pressure: 60 Max PSI (2.5 Min–4.0 Max atm)
- Environmentally Controlled:
– Ambient Room: 15⁰C – 25⁰C
– Relative Humidity: < 95%
– Conditions must be non-condensing - Water Hook Up: 1-1/4″ (31.8mm) OD Barb
- Heat Load: ~50kBTU/hr @ Full Power
These are preliminary specifications. The information contained herein is subject to change without notice.
Contact Us
1-800.USA.MADE
Crescend Technologies, LLC
100 High Grove Boulevard
Glendale Heights, IL 60139
USA